Application Range:
Separate precise SMD thin board, aluminum PCB, copper PCB, RF4, fiberglass PCB and T5T8 light.
For special board ,needs customization.
Feature:
The conventional PCB cutting machine can only cut one small board at a time, and the whole light strip board needs to be cut through many times, and the production efficiency is low.
- The device uses multiple sets of cutters to cut the entire LED board at a time, greatly improving production efficiency.
- Not only can labor costs be reduced, but non-standard multi-group multi-blade separators can be customized to achieve automated loading and automatic storage the boards.
- The ML-900 cutting machine can Improve efficiency and save labor, and the daily output can reach more than 100,000 pcs;
- Docking loading devices can reach fully automatic production.
- This machine can perfectly control the deformation of the sub-plate to meet the demanding requirements of the glass tube dispensing process;
- Adjusting the knife is not complicated, ordinary employees can learn through simple training
- Equipped with SMEMA interface to communicate with other devices. There is a reserved network interface to facilitate subsequent networking;
- Safety: light curtain safety device + protective cover, double safety protection to avoid staff injuries
- There are data monitoring: boot time monitoring, capacity monitoring, equipment fault information and automatic rejection system.
- The distance between the upper and lower knives can be accurately adjusted. The distance between the upper and lower knives can be adjusted according to the V-CUT spacing of the PCB. The precision is controlled at ±1MM
- The spacing between adjacent sets of blades can be adjusted between 8mm-230mm. The precision of the single board is controlled by the meson to control at 0.02mm, and the cumulative tolerance of the whole board is controlled at 0.1mm, which can quickly complete the required width.
- The speed of the conveyor belt is adjustable;
- The tool is specially made, the thickness of the blade is 8mm, and the single board can be divided into 8mm or more (bars below 8mm can be customized), the tool material is imported SKH-11 high speed steel, made in Taiwan, and the durability is increased 1.5. -2 times, can be repeatedly ground and reused.